Fusion Tough Coat - Matte
Application Tool: Foam Sponge
Location: Interior/Exterior
Re-coat Time: 1-2 hours
Dry Time: To touch 30min-1 hour
Top Coat: Wax, Stain & Finishing Oil optional for additional durability
Clean Up: Water
Coverage: 75 sq.ft.
Finish/Sheen: Matte or Gloss
Recommended Uses: Heavy wear and tear areas for added durability.
Can Be Applied To: All water-based finishes, paints.
Can Be Painted Over: Yes once dried
How to Prep: Apply over water-based paints or topcoats for the desired effect - do not apply over oil-based products or wax.
Cure Time: 14-30 Days
Maintenance/Cleaning: Light cleaners
How To Use It:
Gently mix your Tough Coat™ prior to using it as the matting agent and other ingredients may settle to the bottom. Do not shake vigorously as this will cause air bubbles in your piece that are difficult to remove once applied. Wipe onto surface with damp sponge or applicator pad. Dries quickly, so do not go over the same area twice until second coat (if desired).
Coverage:
500ml covers about 75 sq.ft (7m2)
Apply a very thin layer using a sponge or applicator pad over light colours for added durability. If your Tough Coat is drying too fast, add Fusion's Paint Extender or use their Continuous Water Mister to even out the finish. Not recommended over dark colours unless applied extremely thin, or using the gloss. Sometimes the matting agent will go cloudy over darker colours. Instead it is recommended to use Fusion's Stain & Finishing Oil over darker colours. 500ml covers about 75 sq.ft (7m2). Clean up is easy with soap and warm water. Gently mix or stir prior to using (do not shake); wipe onto surface with damp sponge or applicator pad. Dries quickly, so do not go over the same area twice until second coat (if desired). Fusion's non-yellowing water-based Tough Coat comes in 2 sheens, matte and gloss. Perfect for those high traffic surfaces such as table tops.
- Non-yellowing, perfect for keeping your white paint colours purely white. Dries quickly and can be painted over to create a "Tough Coat Sandwhich"
How does it work?
Fusion's Non - yellowing formula keeps your whites bright. Just apply over your high traffic areas for super durability. Wipe-on poly that is Tough
Can I use Tough Coat over Fusion Mineral Paint?
Yes you can! Fusion™ Mineral Paint is famous for its built in top coat. Sometimes though, you may want a slight sheen and added colour vibrancy, or you may want the peace of mind of an extra bit of protection over high traffic areas such as kitchen cabinets or table tops. This is where Tough Coat comes into play
Can I use Fusion Mineral Paint over Tough Coat?
Yes, all of Fusions water based products were designed to be layered over each other. Giving you greater options to Paint it beautiful.
Can I use Tough Coat outside?
We do not recommend this product for exterior use.
Is Tough Coat food-safe?
No Tough Coat is not considered food safe.
Can I use Tough Coat on my wood floors?
Definitely. For this application, apply with an applicator or sponge for best results. This will work best for lighter colours, for darker colours use All In One Finishing Oil in Natural.
For More Information:
